The data set provided the cloudless Fractional Snow Cover area (FSC) time-series product basing on the MODIS data and covered the Heihe River Basin from January 2010 to December 2013. They also provide the high spatial (500 m) and temporal (1 day) resolution. Firstly, the end-member were automatically extracted by the fast autonomous spectral end-member determination (N-FINDR) maximizing volume iteration algorithm. Combining N-FINDR with the orthogonal subspace projection (OSP) approach, we propose an improved end-member extraction algorithm using a maximizing, volume-based iterative method. All the 6 end-members were extracted including snow, soil, water, bare land, vegetation, and cloud, respectively. Then, the 10-day spectral library time series based on prior knowledge of Heihe basin are built for 2009. The primary data were produced using the fully constrained least squares (FCLS) linear spectral mixture analysis method by the spectral library. Finally,the cubic spline interpolation algorithm were used to the eliminate the cloud pixels completely and obtain the data set. The data are validated by the fractional snow cover derived from Landsat imagery and the results indicate that the improved algorithm can obtain the end-member information accurately, and the retrieved fractional snow cover has better accuracy than the MODIS fractional snow-cover product (MOD10A1). So the data set can provide more accurate input for the hydrology and climate model.
HUANG Xiaodong, ZHANG Ying, TANG Zhiguang, LI Xin
The dataset of ground truth measurement synchronizing with Envisat ASAR and MODIS was obtained in the arid region hydrological experimental area on May 24, 2008. The Envisat ASAR data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:34 BJT. Observation items included: (1) The radiative temperature of Reaumuria soongorica and the bare soil in Huazhaizi desert No. 2 plot (HZZHMYD2)was collected using ThermaCAM SC2000 (1.2m above the ground, FOV = 24°×18°), along the diagonal (NW-SE). The data included raw data (read by ThermaCAM Researcher 2001), recorded data and the blackbody calibrated data (archived as Excel files). (2) The radiative temperature by the automatic thermometer (FOV: 10°; emissivity: 0.95), were measured at nadir with time intervals of one second. Raw data, blackbody calibrated data and processed data were all archived as Excel files. (3) The radiative temperature in Huazhaizi desert No. 2 plot by the handheld infrared thermometer (which belongs to BNU) along the diagonal (NW-SE). Raw data (.doc), blackbody calibrated data and processed data (in Excel format) were all archived. (4) Soil moisture (0-40cm) by the cutting ring and the soil temperature by the thermocouple thermometer in Yingke oasis and Huazhaizi foci experimental area. Besides, (a) roughness of No. 1 and 2 Huazhizi desert plots was also measured by self-made instruments . Sample points were selected every 30m along the diagonal of each plot. (b) soil profile moisture (0-100cm) and the temperature in the maize field of Yingke oasis. (c) soil profile moisture (0-100cm) and the temperature in one orchard of Yingke Oasis. Data were all archived as Excel files. (5) the photosynthetic rate of alfalfa and barley at Linze grass station by LI-6400. Raw data were archived in the user-defined format (by notepat.exe) and processed data were as Excel files. (6) ground object reflectance spectra of new-born rape and the bare land in Biandukou foci experimental area by ASD FieldSpec (350~2500 nm) from Institute of Remote Sensing Applications (CAS). Raw data were binary files direct from ASD (by ViewSpecPro), and pre-processed data on reflectance were in Excel format. (7) LAI by the measuring tape and the ruler in the alfalfa field of Linze grass station. The maximum length and width of alfalfa leaves and barley were measured. Data were archived as Excel files. (8) surface roughness in Huazhaizi desert No. 2 plot with the self-made roughness board (Cold and Arid Regions Environmental and Engineering Research Institute, CAS), the digital camera and the compass. Sample points were selected at equal intervals along the diagonals and marked in the photos.
CHEN Ling, KANG Guoting, QIAN Yonggang, REN Huazhong, WANG Haoxing, WANG Jindi, YAN Guangkuo, GE Yingchun, SHU Lele, WANG Jianhua, XU Zhen, GUANG Jie, LI Li, XIN Xiaozhou, ZHANG Yang, ZHOU Chunyan, TAO Xin, YAN Binyan, YAO Yanjuan, CHENG Zhanhui, YANG Tianfu
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in No. 1, 2 and 3 quadrates of the A'rou foci experimental area on Jul. 14, 2008. The Envisat ASAR data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:31 BJT. The quadrates were divided into 4×4 subsites, with each one spanning a 30×30 m2 plot. Those provide reliable ground data for retrieval and validation of soil moisture from active remote sensing approaches. Observation items included: (1) soil moisture by POGO soil sensor in No. 1, 2 and 3 quadrates; 25 corner points of each subsite were chosen for the soil temperature, soil volumetric moisture, the loss tangent, soil conductivity, and the real part and the imaginary part of soil complex permittivity; (2) the soil temperature by the handheld infrared thermometer 3# and 5# from BNU in No. 1 quadrate, 1# and 4# in No. 2 quadrate, and 2# and 6# in No. 3 quadrate; 25 corner points of each subsite were measured twice by two groups, and time, the maximum, the minimum and the mean value, and the land cover types were all recorded. (3) spectrum of the grassland, the bare land and the stellera by the thermal infrared spectrometer, 102F. The dataset includes ASAR images, preprocessed data of the thermal infrared spectrometer, 102F, the surface temperature and soil moisture synchronizing with Envisat ASAR.
GAO Hongchun, LI Hongxing, LIU Chao, RAN Youhua, REN Huazhong, YU Yingjie
This dataset uses daily temperature data from SMMR (1978-1987), SSM/I (1987-2009) and SSMIS (2009-2015). It is generated by the dual-index (TB, 37v, SG) freeze-thaw discrimination algorithm. The classification results include the frozen surface, the thawed surface, the deserts and water bodies. The data coverage is the main part of China’s mainland, with a spatial resolution of 25.067525 km via the EASE-Grid projection method, and it is stored in ASCIIGRID format. All the ASCII files in this data set can be opened directly with a text program such as Notepad. Except for the head file, the body content is numerically characterized by the freeze/thaw status of the surface soil: 1 for frozen, 2 for thawed, 3 for desert, and 4 for precipitation. If you want to use the icon for display, we recommend using the ArcView + 3D or Spatial Analyst extension module for reading; in the process of reading, a grid format file will be generated, and the displayed grid file is the graphical expression of the ASCII file. The read method comprises the following. [1] Add the 3D or Spatial Analyst extension module to the ArcView software and then create a new View. [2] Activate View, click File menu, and select the Import Data Source option. When the Import Data Source selection box pops up, select ASCII Raster in the Select import file type box. When the dialog box for selecting the source ASCII file automatically pops up, click to find any ASCII file in the data set, and then press OK. [3] Type the name of the Grid file in the Output Grid dialog box (it is recommended that a meaningful file name is used for later viewing) and click the path to store the Grid file, press OK again, and then press Yes (to select integer data) and Yes (to put the generated grid file into the current view). The generated files can be edited according to the Grid file standard. This completes the process of displaying an ASCII file into a Grid file. [4] In the batch processing, the ASCIGRID command of ARCINFO can be used to write AML files, and then use the Run command to complete the process in the Grid module: Usage: ASCIIGRID <in_ascii_file> <out_grid> {INT | FLOAT}. The production of this data is supported by the following Natural Science Foundation Projects: Environmental and Ecological Science Data Center of West China (90502010), Land Data Assimilation System of West China (90202014) and Active and Passive Microwave Radiation Transmission Simulation and Radiation Scattering Characteristics of the Frozen Soil (41071226).
LI Xin
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in No. 1 and 2 quadrates of the E'bao foci experimental area on Oct. 17, 2007 during the pre-observation period The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 23:04 BJT. Both the quadrates were divided into 3×3 subsites, with each one spanning a 30×30 m2 plot. 25 sampling points were chosen, including centers and corners. Simultaneous with the satellite overpass, numerous ground data were collected, soil volumetric moisture, soil conductivity, the soil temperature, and the real part of soil complex permittivity by the WET soil moisture tachometer; the surface radiative temperature by the hand-held infrared thermometer; soil gravimetric moisture, volumetric moisture, and soil bulk density by drying soil samples from the cutting ring. Meanwhile, vegetation parameters as height, coverage and water content were also observed. Meanwhile, vegetation parameters as height, coverage and water content were also observed. Those provide reliable ground data for retrieval and verification of soil moisture, soil freeze/thaw status and the microwave radiative transfer model from active remote sensing approaches.
CHAO Zhenhua, CHE Tao, QIN Chun, WU Yueru
The dataset of ground truth measurement synchronizing with Envisat ASAR was obtained in No. 2 and 3 quadrates of the A'rou foci experimental area on Mar. 14, 2008. The Envisat ASAR data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 23:21 BJT. The quadrates were divided into 4×4 subsites, with each one spanning a 30×30 m2 plot. Only the corner points of each subsite were chosen for observations. Those provide reliable ground data for retrieval and verification of soil moisture from active remote sensing approaches. In No. 2 quadrate, simultaneous with the satellite overpass, numerous ground data were collected, the soil temperature, soil volumetric moisture, the loss tangent, soil conductivity, and the real part and the imaginary part of soil complex permittivity by the POGO soil sensor, the mean soil temperature from 0-5cm by the probe thermometer, the surface radiative temperature measured three times by the hand-held infrared thermometer, soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring (100cm^3). In No. 3 quadrate, simultaneous with the satellite overpass, numerous ground data were collected, the soil temperature, soil volumetric moisture, the loss tangent, soil conductivity, and the real part and the imaginary part of soil complex permittivity by the POGO soil sensor, soil volumetric moisture by ML2X, the mean soil temperature from 0-5cm by the probe thermometer, the surface radiative temperature measured three times by the hand-held infrared thermometer, soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring (100cm^3). Surface roughness was detailed in the "WATER: Surface roughness dataset in the A'rou foci experimental area".
CAO Yongpan, GU Juan, LI Xin, LI Zhe, MA Mingguo, SHU Lele, WANG Jianhua, WANG Xufeng, WU Yueru, ZHU Shijie, CHANG Cun
The dataset of ground truth measurements synchronizing with ALOS PALSAR was obtained in the Linze station foci experimental area on Jul. 10, 2008. The ALOS PALSAR data were in FBS mode and HH polarization combinations, and the overpass time was approximately at 23:39 BJT. Soil moisture (0-5cm) data were measured by the cutting ring method (50cm^3) in LY07 and LY08 quadrates (repeated nine times). The quadrate location information was listed in coordinates.xls and data were archived as Excel files. See the metadata record “WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area” for more information of the quadrate locations.
PAN Xiaoduo, SONG Yi
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in the saline plot B, the alfalfa plot D and the barley plot E of the Linze grassland foci experimental area on May 24, 2008. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:34 BJT. The quadrate was divided into 6×6 subsites, with each one spanning a 120×120 m2 plot. Corner points were chosen. Simultaneous with the satellite overpass, numerous ground data were collected, soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by the cutting ring (100cm^3), the mean soil temperature from 0-5cm by the probe thermometer, and the land surface radiative temperature measured three times by the hand-held infrared thermometer in plot B; soil moisture, soil conductivity, the soil temperature, and the real part of soil complex permittivity by WET, the mean soil temperature from 0-5cm by the probe thermometer, and the land surface radiative temperature measured three times by the hand-held infrared thermometer in plot D; the soil temperature, soil moisture, the loss tangent, soil conductivity, the real part and the imaginary part of soil complex permittivity by the POGO soil sensor, the mean soil temperature from 0-5cm by the probe thermometer, and the land surface radiative temperature measured three times by the hand-held infrared thermometer in plot E. Data were archived in Excel file. Those provide reliable ground data for retrieval and validation of soil moisture and alinity content with active microwave remote sensing approaches. See WATER: Dataset of setting of the sampling plots and stripes in the Linze station foci experimental area for more information.
CHAO Zhenhua, HU Xiaoli, LIANG Ji, Wang Weizhen, LIU Zhaoyan, TANG Bohui, HAN Hui, WANG Xiaoping
This data set uses SMMR (1979-1987), SSM / I (1987-2009) and ssmis (2009-2015) daily brightness temperature data, which is generated by double index (TB V, SG) freeze-thaw discrimination algorithm. The classification results include four types: frozen surface, melted surface, desert and water body. The data covers the source area of three rivers, with a spatial resolution of 25.067525 km. It is stored in geotif format in the form of ease grid projection. Pixel values represent the state of freezing and thawing: 1 for freezing, 2 for thawing, 3 for deserts, 4 for water bodies. Because all TIF files in the dataset describe the scope of Sanjiangyuan National Park, the row and column number information of these files is unchanged, and the excerpt is as follows (where the unit of cellsize is m): ncols 52 nrows 28 cellsize 25067.525 nodata_value 0
The Sentinel-1A/B satellite uses a near-polar sun-synchronous orbit with an orbital altitude of 693 km, an orbital inclination of 98.18°, and an orbital period of 99 minutes. It is equipped with a C-band Synthetic Aperture Radar (SAR) with a designed service life of 7 years (12 years expected). Sentinel-l has a variety of imaging methods that enable different polarization modes such as single-polarization and dual-polarization. Sentinel-1A SAR has four working modes: Strip Map Mode (SM), Extra Wide Swath (EW), Interferometric Wide Swath (IW) and Wave Mode (WV). Satellite A was successfully launched in April 2014. The revisit period of the same region was 12 days. Satellite B successfully operated on orbit in April 2016. The current revisiting period reached 3 to 6 days. After the operation of two satellites, the S1 data acquisition frequency in the Antarctic region increased greatly. This data set comprises the Sentinel-1 SAR data for the Antarctic ice sheet and the Greenland Ice Sheet area. The data band comprises C-band extra wide multiview data with a resolution of 20 m*40 m. The temporal resolution is 12 days and is related to the round-trip period, the width is 400 km, the noise level is -25 dB, and the radiation measurement accuracy is 1.0 dB. The annual temporal coverage of these data is October to the next March in the Antarctic and April to September in Greenland, and the spatial coverage comprises the Antarctic ice sheet ice shelf area and Greenland ice sheet.
Lu Zhang
The dataset of ground truth measurement synchronizing with Envisat ASAR was obtained in No. 1, 2 and 3 quadrates of the A'rou foci experimental area on Jul. 5 and Jul. 6, 2008. The Envisat ASAR data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:14 BJT. The quadrates were divided into 4×4 subsites, with each one spanning a 30×30 m2 plot. Observation items included: (1) the quadrate investigation in No. 2 and 3 quadrates: GPS by GARMIN GPS 76, plant species by manual cognition, the plant number by manual work, the height by the measuring tape repeated 4-5 times, phenology by manual work, the coverage by manual work (compartmentalizing 0.5m×0.5m into 100 to see the percentage the stellera takes) and the chlorophyll content by SPAD 502. (2) spectrum of stellera and pasture by ASD FieldSpec (350~2 500 nm), with 20% reference board. The preprocessed canopy spectrum was archived. (3) BRDF by ASD FieldSpec (350~2 500 nm), with 20% reference board. The processed reflectance and transmittivity were archived as .txt files. (4) photosynthesis of stellera and pasture by LI-6400. The data were archived in Excel format. (5) soil moisture by WET soil moisture tachometer. Acquisition time, soil moisture (%vol), Ecp (ms/m), Tmp Eb and Ecb (ms/m) of 25 corner points were archived. (6) the soil temperature by the handheld infrared thermometer. Acquisition time, the soil temperature measured three times and the land cover types were archived. The data included the canopy reflectance on Jul. 5 and 6, photosynthesis on Jul. 5 and 6, BRDF on Jul. 5, photos on Jul. 5, the infrared land surface temperature and soil moisture by WET on Jul. 5, biomass on Jul. 5 and the surface temperature along No. 3 flight on Jul. 6.
DING Songchuang, GE Yingchun, LI Hongyi, MA Mingguo, Qian Jinbo, WANG Yang, YU Yingjie, LIU Sihan
The dataset of ground truth measurements for snow synchronizing with Envisat ASAR was obtained in the Binggou watershed foci experimental area on Mar. 15, 2008. The Envisat ASAR data were acquired in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:34 BJT. Observation items included: (1) Snow density, snow complex permittivity, snow volumetric moisture and snow gravimetric moisture by the snowfork in BG-B, BG-D, BG-E and BG-F; (2) Snow parameters including the snow surface temperature and the snow-soil interface temperature by the handheld infrared thermometer, the snow layer temperature by the probe thermometer, the snow grain size by the handheld microscope, snow density by the aluminum case, snow depth by the ruler, and the snow surface temperature synchronizing with ASAR in BG-H, BG-D, BG-E and BG-F; (3) The snow spectrum by the portable ASD (Xinjiang Meteorological Administration) synchronizing with ASAR in BG-H15; the major and minor axis and shape of the snow layer grain through the self-made snow sieve. Two files including raw data and the preprocessed data were archived.
BAI Yanfen, BAI Yunjie, GE Chunmei, HAO Xiaohua, LI Hongyi, LIANG Ji, SHU Lele, WANG Xufeng, XU Zhen, MA Mingguo, QU Wei, REN Jie, CHANG Cun, DOU Yan, MA Zhongguo, LIU Yan, ZHANG Pu
The dataset of ground truth measurements for snow synchronizing with EO-1 Hyperion and Landsat TM was obtained in the Binggou watershed foci experimental area on Mar. 17, 2008. Observation items included: (1) Snow parameters as snow depth by the ruler, the snow layer temperature by the probe thermometer, the snow grain size by the handheld microscope, the snow surface temperature and the snow-soil interface temperature by the handheld infrared thermometer simultaneous with the satellite in BG-A, BG-E, BG-F and BG-H. (2) Snow density, snow complex permittivity, snow volumetric moisture and snow gravimetric moisture by the Snowfork in BG-A, BG-E and BG-H. Besides, 25-hour fixed-point continuous observation was carried out at the Binggou cold region hydrometerological station. (3) The snow spectrum by ASD (Xinjiang Meteorological Administration) (4) Snow albedo by the total radiometer Two files including raw data and preprocessed data were archived.
BAI Yanfen, BAI Yunjie, GE Chunmei, HAO Xiaohua, LIANG Ji, SHU Lele, WANG Xufeng, XU Zhen, ZHU Shijie, MA Mingguo, CHANG Cun, DOU Yan, MA Zhongguo, JIANG Tenglong, XIAO Pengfeng , LIU Yan, ZHANG Pu
Snow duration on the Tibetan Plateau changes relatively quickly, and the mountainous areas around the plateau are characterized by abundant snow and ice resources and active atmospheric convection. Optical remote sensing is often affected by clouds. Snow cover monitoring needs to consider the cloud-removal problem on a daily time scale. Taking full account of the terrain of the Tibetan Plateau and the characteristics of snow on the mountains, this data set adopted a combination of various cloud-removing processes and steps to gradually remove the daily snow cover by maintaining the cloud-classify accuracy of the snow cover. In addition, a step-by-step comprehensive classification algorithm was formed, and the “MODIS daily cloud-free snow cover product over the Tibetan Plateau (2002-2015)” was completed. Two snow seasons from October 1, 2009, to April 30, 2011, were selected as test data for algorithm research and accuracy verification, and the snow depth data provided by 145 ground stations in the study area were used as a ground reference. The results showed that in the plateau region, when the snow depth exceeds 3 cm, the total classification accuracy of the cloud-free snow cover products is 96.6%, and the snow cover classification accuracy is 89.0%. The whole algorithm procedure, based on WGS84 projected MODIS snow products (MOD10A1 and MYD10A1) with medium resolution, results in a small loss of cloud-removal accuracy, which made the data highly reliable.
QIU Yubao
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in the Linze grassland foci experimental area on Jul. 11, 2008. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:26 BJT. Observations were carried out in the reed plot A, the saline plots B and C, the alfalfa plot D and the barley plot E, which were divided into 6×6 subsites, with each one spanning a 120×120 m2 plot. Soil gravimetric moisture, volumetric moisture, and soil bulk density after drying by using the cutting ring, the mean soil temperature from 0-5cm by the probe thermometer, and the canopy temperature and the land surface temperature by the hand-held infrared thermometer were measured in A, B and C; the soil temperature, soil moisture, the loss tangent, soil conductivity, the real part and the imaginary part of soil complex permittivity by the POGO soil sensor, the mean soil temperature from 0-5cm by the probe thermometer, the canopy temperature and the land surface temperature by the hand-held infrared thermometer in D and E. Data were archived in Excel file. See WATER: Dataset of setting of the sampling plots and stripes in the foci experimental area of Linze station for more information.
CAO Yongpan, CHAO Zhenhua, GE Chunmei, HU Xiaoli, HUANG Chunlin, LIU Chao, WU Yueru, SHEN Xinyi
The dataset of chlorophyll content observations was obtained in the Yingke oasis and Linze grassland foci experimental areas. Observation items included: (1) Chlorophyll content synchronizing with TM in Yingke oasis No. 1, 4 and 5 maize plots on May 20, 2008. (2) Chlorophyll content synchronizing with ASTER and MODIS in Linze grassland foci experimental areas on May 24, 2008. (3) Chlorophyll content synchronizing with ASTER and MODIS in Yingke oasis maize field on May 28, 2008. (4) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on May 30, 2008. (5) Chlorophyll content synchronizing with OMIS-II in Yingke oasis maize field on Jun. 16, 2008. (6) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on Jun. 29, 2008. (7) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) and TM in Yingke oasis maize field on Jul. 7, 2008. (8) Chlorophyll content synchronizing with WiDAS (Wide-angle Infrared Dual-mode line/area Array Scanner) in Yingke oasis maize field on Jul. 11, 2008.
LI Li, XIN Xiaozhou, ZHANG Yang, ZHOU Mengwei
This dataset mainly includes the passive microwave brightness temperature obtained from the Scanning Multichannel Microwave Radiometer (SMMR) carried by the Nimbus-7 satellite, including 06H, 06V, 10H, 10V, 18H, 18V, 21H, 21V, 37H, 37V, a total of ten microwave channels with two transits (ascending & descending) brightness temperature per day from October 25, 1978 to August 20, 1987, where H represents horizontal polarization and V represents vertical polarization. Nimbus-7, launched in October 1978, is a solar-synchronous polar-orbiting satellite. The microwave sensor SMMR is a dual-polarization microwave radiometer that measures the brightness temperature of five frequencies (6.6GHz, 10.69GHz, 18.0GHz, 21.0GHz, 37.0GHz) on the surface. It scans the surface at a fixed incident angle of about 50.3 °, with a width of 780 km, and passes through the equator at noon 12:00 (ascending orbit) and 24:00 (descending orbit). The time resolution of SMMR is daily, but due to the wide distance between swaths, the same surface will be revisited every 5-6 days. 1. File format and naming: Each set of data is composed of remote sensing data files. The name and naming rules of each group of data files in the SMMR_Grid_China directory are as follows: SMMR-MLyyyydddA / D.subset.ccH / V (remote sensing data) Among them: SMMR stands for SMMR sensor; ML stands for multi-channel low resolution; yyyy stands for year; ddd stands for Julian Day of the year (1-365 / 366); A / D stands for ascending (A) and derailing (D ); subset represents the brightness temperature data in China; cc represents the frequency (6.6GHz, 10.69GHz, 18.0GHz, 21.0GHz, 37.0GHz); H / V represents horizontal polarization (H) and vertical polarization (V). 2. Coordinate system and projection: The projection method is an equal area secant cylindrical projection, and the double standard parallels are 30 degrees north and south. For more information about EASE-GRID, please refer to http://www.ncgia.ucsb.edu/globalgrids-book/ease_grid/. If you need to convert the EASE-Grid projection to Geographic projection, please refer to the ease2geo.prj file, the content is as follows: Input projection cylindrical units meters parameters 6371228 6371228 1 / * Enter projection type (1, 2, or 3) 0 00 00 / * Longitude of central meridian 30 00 00 / * Latitude of standard parallel Output Projection GEOGRAPHIC Spheroid KRASovsky Units dd parameters end 3. Data format: Stored as integer binary, each data occupies 2 bytes. The actual data stored in this dataset is the brightness temperature * 10. After reading the data, you need to divide by 10 to get the real brightness temperature. Spatial resolution: 25km; Time resolution: daily, from 1978 to 1987. 4. Spatial range: Longitude: 60.1 ° -140.0 ° East longitude; Latitude: 14.9 ° -55.0 ° north latitude. 5. Data reading Remote sensing image data files for each set of data can be opened in ENVI and ERDAS software.
NSIDC
The global Cryosat-2 GDR dataset is generated by the European Space Agency (ESA); it has a temporal coverage from 2010 to 2016 and covers the globe. On April 8, 2010, the ESA launched the Cryosat-2 high-tilt polar orbit satellite. The satellite is equipped with an SAR Interferometer Radar Altimeter (SIRAL), which is mainly used to monitor polar ice thickness and sea ice thickness changes, and, furthermore, to study the effects of melting polar ice on global sea level rise and that of global climate change on Antarctic ice thickness. The altimeter operates in the Ku-band and at a frequency of 13.575 GHz, it includes three measurement modes. One is a low-resolution altimeter measurement mode (LRM) that points to the subsatellite point to obtain all surface observations for land, sea, and ice sheets; its processing is similar to ENVISAT/RA-2, with an orbital resolution of 5 to 7 km. The second is the Synthetic Aperture Radar (SAR) measurement mode, which is mainly used to improve the accuracy and resolution of sea ice observations; it can make the resolution along the orbit reach approximately 250 m. The third is the Interferometric Synthetic Aperture Radar (InSAR), which is mainly used to improve the accuracy of areas with complex terrain such as the edges of ice sheets or ice shelves. The CryoSat -2/SIRAL data products mainly include 0-level data, 1b-level data, 2-level data and high-level data. The Cryosat-2/SIRAL products consist of two files: an XML head file (.HDR) and a data product file (.DBL). The HDR file is an auxiliary ASCII file for fast identification and retrieval of the data files. 1b-level products are stored separately according to the measurement modes, and the data recording formats of different modes are also different. Each waveform in LRM mode and SAR mode has 128 sampling points, while that in SARIn mode has 512 sampling points. 2-level GDR products are available for most scientific applications, including measurement time, geographic location, altitude, and more. In addition, the altitude information in GDR products has been obtained through instrumental calibration, transmission delay corrections, geometric corrections, and geophysical corrections (such as atmospheric corrections and tidal corrections). The GDR products are single global full-track data, that is, the measurement results of the three modes. After different processing, they are combined in chronological order; thereby, the data recording formats are unified. The data in the three modes use different waveform retracking algorithms to obtain altitude values. In the latest updated Baseline C data, the LRM mode data use three algorithms: Refined CFI, UCL and Refined OCOG.
SHEN Guozhuang, FU Wenxue
Using the Modis1B data of 11 scenes from 2003 to 2013 (the ice shelf Modis1B data published on the NSIDC website), the surface velocity of the Antarctic Amery Ice Shelf was extracted by the subpixel cross-correlation method, the ice velocity was extracted by the COSI-Corr software, and then the time sequence of annual average velocities for nearly ten years was obtained. Due to the lack of field observations in the study area, the accuracy of the ice flow results was estimated by using the offset value of the stable region, and the ice flow error was approximately ±50 m/year. The ice velocity data date from 2003 to 2013, the temporal resolution is one year, and the data cover the Amery area with a spatial resolution of 500 m. A GeoTIFF file of velocity data is stored every year. For details regarding the data, please refer to the Amery Ice Flow Field - Data Description.
JIANG Liming
The dataset of ground truth measurements synchronizing with Envisat ASAR was obtained in the Linze station foci experimental area from Sep. 12 to Sep. 15, 2007 during the pre-observation period. One scene of Envisat ASAR image was captured on Sep. 19. The data were in AP mode and VV/VH polarization combinations, and the overpass time was approximately at 11:29 BJT. Observation items included: (1) GPS by GARMIN GPS 76 (2) LAI by LAI-2000 (3) photosynthesis measured by LI6400 from Linze station carried out according to WATER specifications. Raw data were archived in the user-defined format , which can be opened by notepat and processed by Excel. (4) object spectrum of typical ground objects measured by ASD FieldSpec Spectroradiometer (350~2 500 nm) from Gansu Meteorological Administration. The reference whiteboard was attached therein. Raw spectral data were archived as binary files, which were recorded daily in detail, and pre-processed data on reflectance were archived as text files (.txt). (5) infrared temperature measured by the handheld infrared thermometer from Cold and Arid Regions Environmental and Engineering Research Institute, which was calibrated. The infrared temperature of the crown, the vertical canopy, 45 degrees frontlight and backlight were measured respectively. The data were archived as Excel files. (6) soil profile (0-10cm, 10-20cm, 20-40cm and 40-60cm), and soil moisture measured by the cutting ring method. Profile photos were taken meanwhile. (7) quadrate (1m×1m) investigations, including the quadrate number, species, quantities, coverage, the total quadrate coverage, the mean height, biomass number, the total green weight and the total dry weight. (8) repeated measurements on chlorophyll content of different species measured by SPAD 502. (9) photos taken by Nikon D80 with a lens of Sigma 8mm F3.5 EX DG CIRCULAR FISHEYE, shooting straight downwards at the height of 1.5m (10) atmospheric parameters at Daman Water Management office measured by CE318 (produced by CIMEL in France). The total optical depth, aerosol optical depth, Rayleigh scattering coefficient, column water vapor in 936 nm, particle size spectrum and phase function were then retrieved from these observations. The optical depth in 1020nm, 936nm, 870nm, 670nm and 440nm were all acquired by CE318. Those data include the raw data in .k7 and can be opened by ASTPWin. ReadMetext files (.txt) is attached for detail. Processed data (after retrieval of the raw data) in Excel are on optical depth, rayleigh scattering, aerosol optical depth, the horizontal visibility, the near surface air temperature, the solar azimuth, zenith, solar distance correlation factors, and air column mass number.
BAI Yunjie, CHE Tao, DING Songchuang, GAO Song, HAN Xujun, HAO Xiaohua, LI Hongyi, LI Xin, LI Zhe, LIANG Ji, PAN Xiaoduo, QIN Chun, RAN Youhua, WANG Xufeng, WU Yueru, YAN Qiaodi, ZHANG Lingmei, FANG Li, LI Hua, Liu Qiang, Wen Jianguang, MA Hongwei, YAN Yeqing, YUAN Xiaolong
Contact Support
Northwest Institute of Eco-Environment and Resources, CAS 0931-4967287 poles@itpcas.ac.cnLinks
National Tibetan Plateau Data CenterFollow Us
A Big Earth Data Platform for Three Poles © 2018-2020 No.05000491 | All Rights Reserved | No.11010502040845
Tech Support: westdc.cn